5 Uses For Remodels

Posted on Posted in Home Products & Services

DIY Basement Waterproofing Tips If your basement foundation is poorly constructed, water seepage and condensation may occur when it rains. This is the last thing many homeowners will want to see, but you don’t need to panic when it happens. Waterproofing is one of the key solutions to reduce this kind of a mess within your basement. First, you require a strong and high-quality waterproof coat. This will work well if the block walls are in the right form because preventing water seepage has not been an easy thing. Poorly constructed walls require removal of the loose mortar and broken blocks. Using a wire brush, clean the dirt and grease, plus any other contaminant from the surface. Use a quick-dry cement to shut the cracks or openings on the foundation wall. Read the manufacturer’s instructions before you start working on the openings and cracks. Sometimes, the waterproofing is mixed with cement before applying on the cracks. Many homeowners make the mistake of adding too much or too little waterproof, which may cause other problems down the line. It’s even wiser to use more of waterproofing because it implies a stronger sealing.
Study: My Understanding of Remodels
More importantly, avoid making a thin waterproof as it will not stop moisture leakage. If the water is seeping at a higher rate, you can add an extra coating to strengthen the first coating. However, ensure the coating work is done directly on the building material. Make sure all cracks are sealed appropriately.
What You Should Know About Basements This Year
When it comes to buying coating products, it is advisable to shop well for the right thing. ‘Water repellant’ and ‘Waterproofing’ are two terms that many manufacturers use interchangeably. The two are different things. Water repellant is usually for coating above the concrete and not effective for preventing water leakage under hydrostatic pressure. On the other hand, waterproofing coating is effective for stopping water seeping under hydrostatic pressure. It is particularly applied on and below the concrete on both interior and exterior wall surfaces. A heavy downpour flowing towards a house, damaged gutters, wind-driven rain, or high water table can be a cause of hydrostatic pressure. Every homeowner need to distinguish between moisture seepage and condensation. However, you can identify the cause of foundation’s wetness by tapping an aluminum foil on the wall and leave for a couple of days. If you find that the foil’s side in contact with the wall is wet, the possible problem is seepage. If you notice only the upper side is wet, the problem is condensation. However, both condensation and seepage could be a problem if both sides of the foil are wet. Therefore, a dehumidifier and a high-quality waterproofing coating can stop moisture condensation and water seepage respectively.